Where this service usually fits
- Service pedestal and feeder repairs or replacement
- Panel replacement inside the home
- Adding circuits for heat pumps, EV charging or appliances
- Correcting findings from an inspection or insurance review
- Work in parks where the pedestal may be shared or park-owned
What actually moves this price
This page publishes no single figure on purpose. An installed Vermont price depends on the variables below, and a number quoted without them would hide the assumptions that decide it. Take these to any electrician and the quotes become comparable.
| Cost driver | Why it changes the number | Ask the electrician |
|---|---|---|
| Ownership boundary | In a park, who owns the pedestal, feeder and meter determines who pays and who authorises. Establishing it comes first. | Who owns the pedestal and feeder here? |
| Existing feeder size | Feeders to manufactured homes are frequently sized tightly, so adding load often means the feeder, not just the panel. | What is the existing feeder rated at? |
| Age of the home | Older manufactured homes have wiring and panel types that can be harder to obtain parts for. | What year is the home? |
| Pedestal condition | Outdoor pedestals weather badly, and corrosion at terminations is a common finding. | Has the pedestal been inspected? |
| Park rules and access | Parks often have their own requirements and approval processes on top of municipal ones. | Are there park requirements or approvals needed? |
| Distance from pedestal to home | Feeder length and route affect conductor size and cost. | What run length is assumed? |
Information that changes the scope
- Whether the home is on private land or in a park
- Who owns the pedestal, feeder and meter
- Existing service size and feeder condition
- Age of the home and its original wiring type
- Any inspection or insurance requirement driving the work
What a manufactured housing quote usually includes
For mobile and manufactured home electrical service and repair, these 5 items are normally inside the price. If one is missing from a written estimate, treat that as a question rather than an assumption — it is usually the difference between two quotes that look far apart.
- Service pedestal or pole repair and replacement
- Feeder repair or replacement to the home
- Panel replacement inside the home
- Added circuits for new equipment
- Grounding and bonding correction
What is usually NOT included
These 5 items are commonly outside a manufactured housing quote. Each one is a real cost that lands somewhere, so ask about them explicitly rather than discovering them once the work has started.
- Park-owned infrastructure beyond the point of ownership
- Skirting, structural or siting work
- Utility-owned equipment
- Appliances and equipment
- Relocation or set-up of the home itself
Permits, inspection and code
Manufactured homes have specific requirements covering the service equipment, the feeder to the unit, and grounding and bonding at both ends. The service is typically at a pedestal or pole rather than attached to the home, which is why a manufactured home service upgrade and a site-built one are different jobs with different ownership boundaries.
Timing and scheduling in Vermont
Address pedestal and feeder condition before winter — an outdoor pedestal with corroded terminations is exposed to exactly the weather that causes failure. Where a park approval is needed, start early because it adds a step outside the electrician's control.
What a clear estimate should address
Establish ownership of the pedestal, feeder and meter before anything else — in a park, the boundary between park-owned and homeowner-owned equipment decides who pays and who authorises the work.